Product Sections

SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

Information Pages

Best Sellers

Dragoon Casting Set

234.00

This set compises of the steel lock parts and the brass furniture for the Dragoon pistol kit
All parts are exactly as that of the kit, but no barrel, stock, box etc. Just the bare bones castings.
The screw set however IS supplied with the parts, so as to assist build and assembly.
find out more

Gunguard Brass and Bronze Browning Solution

Gunguard Brass and Bronze Browning Solution

8.50

For colouring brass or bronze to a brown patina, fast acting.
100ml Not available outside mainland UK
find out more

Gunguard Degreasing Liquid

Gunguard Degreasing Liquid

5.00

A must when preparing items for treatment.
When Browning or Blueing, degreasing is probably the most important process you will undertake, This product assists in the removal of unwanted grease and other deposits that can prohibit the correct colouring of steel barrels and parts.
120ml Not available outside mainland UK

find out more

Gunguard Slow Brown Solution

Gunguard Slow Brown Solution

15.00

A superb browning solution, formulated for use on Damascus, however also suitable on non twist barrels.
Please allow approximately 3-8 days for desired finish.
100ml Not available outside mainland UK
find out more

Birchwood Casey Perma Blue Liquid

Birchwood Casey Perma Blue Liquid

9.00

Givesa non-streaky, even, blue-black finish to steel.
Not available outside mainland UK
find out more

Parker Hale G96 Gun Blue Creme

Parker Hale G96 Gun Blue Creme

12.25

A fast acting blue paste
85gms Not available outside mainland UK
OUT OF STOCK AT THIS TIME
find out more

Lock Sets Civilian - Great Britain and Ireland

Online Catalogue | Gun Lock Parts and Furniture Fittings (including castings) | Lock Sets |  Lock Sets Civilian - Great Britain and Ireland

Show First 12 Product(s) Show First 12 Product(s)
Please note:
Each set displayed require fitting and finishing and are available as:-

COMPLETE LOCK SET
All casting parts to complete the lock
Internal parts ie: tumbler, bridle, sear and internal springs where available are not illustrated but are noted within the text description. Screws are not supplied unless stated

RECONVERSION SET
Pan section from plate, Frizzen, Flintcock, Top jaw, Frizzen spring.

INDIVIDUAL ITEMS
Any of the items within the set can be ordered seperately using the drop down 'supplied as' list, where available.

Please Note...

Due to the complexity of some of the smaller component parts of a lock set, orders for such may take up to 7 weeks to complete.
This may of course not be inkeeping with your scheduled project. For this we apologise, but are unable to be more precise to a delivery time. We will however keep you updated as to the progress.

Select complete Lock sets, Re-conversion sets or single items.
Please note that screws are not included unless stated otherwise.

Mortimer Lockset LS042 Right Hand

Mortimer Lockset LS042 Right Hand
CASTINGS SET ONLY ! - Image shows assembled and hardened/coloured lock.
English double shotgun lock for recessed breech, but small enough to suit pistols, C1826.
Deep pear shaped pan
Length of lockplate = 107mm
This image shows refreshed engraving, as original was a little light in areas.( additional cost for refreshed eng).
Left hand set also available, see LS043


Choice

Supplied as:


Quantity:  

Mortimer Lockset LS043 Left Hand

Mortimer Lockset LS043 Left Hand
Left hand to that of LS042
English double shotgun lock for recessed breech, but small enough to suit pistols, C1826.
Deep pear shaped pan
Length of lockplate = 107mm
Right hand set also available, see LS042


Choice

Supplied as:


Quantity:  

Bellis Lock Set Right Hand

Bellis Lock Set Right Hand
CASTINGS SET ONLY ! - Image shows assembled and hardened/coloured lock.
English double shotgun lock casting set. C1820.

Length of lockplate = 115mm
The engraving shown is that of the casting (as cast), the original we moulded was of an excellent crisp condition.
Left hand set also available, see drop down list.


Choice

Supplied as:


Quantity:  

Bellis Lock Set Left Hand

Bellis Lock Set Left Hand
Left handed to LS009
English double shotgun lock casting set. C1820.

Length of lockplate = 115mm
The engraving shown is that of the casting (as cast), the original we moulded was of an excellent crisp condition.
Left hand set also available, see drop down list.


Choice

Supplied as:


Quantity:  

Trade Gun Lock LS099

Trade Gun Lock LS099
Trade Fusil type lock set

Flintcock:= 42.68mm / 1.680"
Frizzen: A= 22.6mm / .890"
Lockplate: A= 152mm/ 5.98", B= 26.7mm / 1.050"
Frizzen Spring := 34.3mm / 1.350"

Tumbler, Sear, Bridle, Sear Spring and Main Spring included in full lock set


Assembled Lock


Choice

Supplied as:


Quantity:  

Griffin Lockset LS090

Griffin Lockset LS090
Round faced lockset with beaded border by 'Griffin'.
All lock parts available and included in Lock set.
Measurements:
Lockplate, LP090 : A = 5.498" / 139.5mm, B= .990" / 25.2mm
Flintcock, FC151: 1.498" / 38.00mm
Top Jaw, TJ151: 916" / 23.3mm, .878" / 22.3mm
Frizzen: A = 964" / 24.5mm, B = 987" / 25.1mm
Frizzen Spring, FS151: 1.330" / 33.8mm



Choice

Supplied as:


Quantity:  

Wogdon Lock Set

Wogdon Lock Set
Super quality Wogdon set, originaly from a double pistol.
All lock part castings are included and the safety slide mechanism.

This is also available in the LEFT HAND model (to be added soon)

ALL other casting parts are available (priced seperately) to enable the completion of a single or double barrelled pistol: Trigger guard, Stand breech, Set trigger, Ramrod pipes and Butt cap.
Please email or phone for further details.


Choice

Supplied as:


Quantity:  

Egg Lock Set LS127 NEW!

Egg Lock Set LS127 NEW!
Superb quality lock by 'Egg' with lock Safety
All lock parts available.
Lockplate LP127 - A = 131.6mm / 5.181" , B = 23.44mm / .922"
Flintcock FC223 - 38.00mm / 1.500"
Frizzen F157 - A = 22.1mm / .873" B = 24.6 / .970"
Top Jaw TJ223 - 26.0mm / 1.00" x 19.6mm / .771"
Frizzen Spring FS127 - 31.8mm / 1.25"


Choice

Supplied as:


Quantity:  

Ketland Lockset LS048 NEW!

Ketland Lockset LS048 NEW!
Fine quality lockset by Ketland

Lockplate LP048 - A = 136mm / 5.535", B = 24.5mm / .964"
Flintcock FC060 - 37.3mm / 1.47"
Frizzen F082 - A = 21mm / .827" B = 24.3 / .955"
Top Jaw TJ060 - 24mm / .946"
Frizzen Spring FS048 - 30.2mm / 1.189"

All other lock parts are available


Choice

Supplied as:


Quantity:  

Mortimer Lockset LS032 NEW!

Mortimer Lockset LS032 NEW!
Mortimer set.
Pan section only, lockplate unavailable at this time.
Right hand set also available, see LS031


Choice

Supplied as:


Quantity:  

Mortimer Lockset LS031 NEW!

Mortimer Lockset LS031 NEW!
Mortimer Lock Set
Pan section only, lockplate unavailable at this time.
Left hand also available, see LS032


Choice

Supplied as:


Quantity:  

Bass Lock Set Right Hand LS102

Bass Lock Set Right Hand  LS102
Pistol or Shotgun lock by 'Bass' - Right hand

Lockplate LP102 A = 112mm x B = 22mm
Flintcock FC175 = 35mm
Frizzen F143 A = 21mm x B= 19mm
Frizzen Spring FS102 = 28mm.

Tumbler, Sear, Bridle, Sear Spring and Main Spring included in full lock set

**FOR MATCHING LEFT HAND LOCK SEE LS103**


Choice

Supplied as:


Quantity:  

Bass Lock Set Left Hand LS103

Bass Lock Set Left Hand LS103
Pistol or Shotgun lock by 'Bass' of London, Left hand, c1785
Plain but superb quality

Lockplate LP103 A = 112mm x B = 22mm
Flintcock FC176 = 35mm
Frizzen F144 A = 21mm x B= 19mm
Frizzen Spring FS103 = 28mm

Tumbler, Sear, Bridle, Sear Spring and Main Spring included in full lock set

**FOR MATCHING RIGHT HAND LOCK SEE LS102**


Choice

Supplied as:


Quantity:  

Griffin Lock Set LS091

Griffin Lock Set LS091
Fowling piece or Rifle lock by ' Griffin' c1765- 1770

Lockplate LP091 A= 132mm, x B= 24mm
Flintcock FC157 = 39mm
Frizzen F126 A= 23mm B= 25mm
Frizzen Spring FS091 = 32mm

Tumbler, Sear, Bridle, Sear Spring and Main Spring included in full lock set


Choice

Supplied as:


Quantity:  

Joyner Lock Set LS055

Joyner Lock Set LS055
Early fowler by 'Joyner' Circa 1780, very elegant piece.

Flintcock FC102 40mm
Frizzen F100 A= 24mm, B= 25mm
Lockplate LP055 A= 147mm, B= 25mm
Frizzen spring FS055 = 35mm
Tumbler, Sear, Bridle, Sear Spring and Main Spring included in full lock set


Choice

Supplied as:


Quantity:  

Show First 12 Product(s)

Online Catalogue | Gun Lock Parts and Furniture Fittings (including castings) | Lock Sets |  Lock Sets Civilian - Great Britain and Ireland