Product Sections

SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

Information Pages

Best Sellers

Dragoon Casting Set

234.00

This set compises of the steel lock parts and the brass furniture for the Dragoon pistol kit
All parts are exactly as that of the kit, but no barrel, stock, box etc. Just the bare bones castings.
The screw set however IS supplied with the parts, so as to assist build and assembly.
find out more

Gunguard Brass and Bronze Browning Solution

Gunguard Brass and Bronze Browning Solution

8.50

For colouring brass or bronze to a brown patina, fast acting.
100ml Not available outside mainland UK
find out more

Gunguard Degreasing Liquid

Gunguard Degreasing Liquid

5.00

A must when preparing items for treatment.
When Browning or Blueing, degreasing is probably the most important process you will undertake, This product assists in the removal of unwanted grease and other deposits that can prohibit the correct colouring of steel barrels and parts.
120ml Not available outside mainland UK

find out more

Gunguard Slow Brown Solution

Gunguard Slow Brown Solution

15.00

A superb browning solution, formulated for use on Damascus, however also suitable on non twist barrels.
Please allow approximately 3-8 days for desired finish.
100ml Not available outside mainland UK
find out more

Birchwood Casey Perma Blue Liquid

Birchwood Casey Perma Blue Liquid

9.00

Givesa non-streaky, even, blue-black finish to steel.
Not available outside mainland UK
find out more

Parker Hale G96 Gun Blue Creme

Parker Hale G96 Gun Blue Creme

12.25

A fast acting blue paste
85gms Not available outside mainland UK
OUT OF STOCK AT THIS TIME
find out more

Steel and Brass Section, Rod and Sheet

Online Catalogue | Materials |  Steel and Brass Section, Rod and Sheet

Steel and Brass section...  

5/8" Diametre Steel Rod

5/8
En3b steel bar, this can be case hardened.
Oil or water quench not possible due to lower carbon content.
Various uses, Lock retaining bolts, Ramod tips
12" lengths of supply, or longer on request.
Price:8.00


Quantity:  

30mm Diametre Steel Rod

30mm Diametre Steel Rod
En3b steel bar, this can be case hardened.
Oil or water quench not possible due to lower carbon content.
Various uses.
12" lengths of supply, or longer on request.
Price:15.00


Quantity:  

1" Diametre Steel Rod (Higher Carbon)

1
En8 steel bar, this can be oil or water hardened on quenching. Has a minimum carbon content of .45%.
Please consider slower speeds during any machining exercise.
12" lengths of supply, or longer on request.
Price:15.00


Quantity:  

10mm A/F Hexagonal Brass Rod

10mm A/F Hexagonal Brass Rod
Approximate mix of 60/40 (copper/zinc), hence not as 'yellow' as our cast 70/30 mix.
Various uses, supplied in 12" lengths.
Longer lengths available upon request.
Price:15.00


Quantity:  

1/4" Diametre Brass Rod

1/4
Approximate mix of 60/40 (copper/zinc), hence not as 'yellow' as our cast 70/30 mix.
Various uses, supplied in 12" lengths.
Longer lengths available upon request.
Price:6.00


Quantity:  

7/16" Diametre Steel Rod

7/16
En1a, free cutting, unleaded.
Ideal for Lock retaining screws on Military and Civilian long guns and Pistols.
Also Top jaw screws and similar.
Can be coloured and case hardened if required.
Sold in 12" lengths, longer lengths are available on request.
Price:8.00


Quantity:  

15mm Diametre Steel Rod

15mm Diametre Steel Rod
En1a, free cutting, unleaded.
Ideal for sidenail/lock retaining screws on Military and Civilian pistols, also long guns.
Other potential uses are Top jaw screws, Ramrod tips, Butt plate screws etc.
Can be coloured and case hardened if required.
Sold in 12" lengths, longer lengths are available on request.
Price:8.00


Quantity:  

7/32" Diametre Steel Rod

7/32
En1a, free cutting, unleaded.
Ideal for internal lock screws on Military and Civilian pistols.
Can be coloured and case hardened if required.
Sold in 12" lengths, longer lengths are available on request.
Price:5.00


Quantity:  

1/4" Diametre Steel Rod

1/4
En1a, free cutting, unleaded.
Ideal for internal lock screws on Military and Civilian pistols.
Can be coloured and case hardened if required.
Sold in 12" lengths, longer lengths are available on request.
Price:5.00


Quantity:  

Online Catalogue | Materials |  Steel and Brass Section, Rod and Sheet