Lockplates - Rest of World
Stock Control Amendment
Please note that all items in this section are not monitored in regards to stock level.
It is impossible to keep a realistic stock level status, where multiple, and individual components combine to a set.
Please contact for a approximate time scale of completion in regards to items listed in this section.
Thank you.
It is impossible to keep a realistic stock level status, where multiple, and individual components combine to a set.
Please contact for a approximate time scale of completion in regards to items listed in this section.
Thank you.
Supply Format
All castings listed require an element of dressing, finishing, drilling/threading and hardening where required, (unless a option suggesting otherwise). A polished finish may have been applied to some items for the purpose of photographic detail.
Measuring Lockplates and Pan
The image on the right indicates how to obtain the sizes on the lockplates and Pans shown below.
Dimension 'D' will be assumed that needed of the frizzen pan cover, and will not include the pan fence thickness.
Lockplates OR Pans are available from the drop down menu. Selecting 'Lockplate' from the choice menu will include the pan in all cases.
Pan sections are more commonly used for converting back to flint projects, where the entire plate would not be required.
LS = Lock set available, RS = Reconversion set available
Please note; The compatable items to these lockplates are available, however may not be within the site structure at present. Please enquire should you have any questions relating to those parts.
Reference to compatable parts are as follows:
FC = Flintcock, TJ = Top Jaw, FR = Frizzen, FS = Frizzen Spring, TU = Tumbler, BRI = Bridle, SE = Sear, SS = Sear Spring, MS = Main Spring.
Dimension 'D' will be assumed that needed of the frizzen pan cover, and will not include the pan fence thickness.
Lockplates OR Pans are available from the drop down menu. Selecting 'Lockplate' from the choice menu will include the pan in all cases.
Pan sections are more commonly used for converting back to flint projects, where the entire plate would not be required.
LS = Lock set available, RS = Reconversion set available
Please note; The compatable items to these lockplates are available, however may not be within the site structure at present. Please enquire should you have any questions relating to those parts.
Reference to compatable parts are as follows:
FC = Flintcock, TJ = Top Jaw, FR = Frizzen, FS = Frizzen Spring, TU = Tumbler, BRI = Bridle, SE = Sear, SS = Sear Spring, MS = Main Spring.
